Solder frame and condensate trap cleaning
Water-based ETIMOL concentrate
| Appearance: | Colorless to slightly yellowish, clear liquid |
| Form of application: | 1:7 - 1:10 with DI water |
| pH value: | alkaline |
| Density at 20 °C: | 0.956 +/- 0.005 g/cm³ |
| System: | water-based (ready to use) |
| Application temperature: | ideally 45 - 65 °C |
| Cleans reliably: | Flux residues, outgassing from printed circuit boards |
| Storage conditions (recommendation): | in the sealed original container at 10 - 25 °C |
| Transportation: | no dangerous goods |
| Durability: | 36 months |
The water-based, alkaline cleaning medium efficiently removes flux residues from solder frames, condensate traps and machine parts. Thanks to the foam-free formulation, the product can usually be used in compressed air-assisted systems and spray systems without the addition of defoaming agents.
Instructions for use:
Depending on the application, dilute the cleaning medium 1:7 - 1:10 with DI water and fill into the automatic cleaning system. Recommended cleaning temperature between 45 - 65 °C.
Note:
Observe the machine manufacturer's approvals!
