Alcohol-based no-clean flux
Di-carboxylic acids, low resin content, halide-free (WEEE/RoHS-compliant)
Typ ISO-9454: 2231 \ DIN EN 61190-1-1: L0 (ORL0)
| Appearance: | Colorless to light yellow, clear liquid |
| Dangerous goods: | Yes |
| Solids content: | 2.2 wt.-% |
| Acid number: | 14 - 16 mg KOH/g |
| Halide-free: | Yes |
| Resinous: | Yes |
| Available as a concentrate: | Yes |
| Density 20 °C: | 0.793 (+/- 0.003) g/ml |
| Flash point: | 12 °C |
| Minimum durability: | 24 months |
Like all multifluxes, the EO-B-001A can be used for wave (spray fluxing) as well as for selective, manual and dip soldering. The A variant has a low solids content of 2.2 wt.-%. This variant was specially developed for full tunnel nitrogen applications and guarantees significantly better soldering results than conventional adipic acid solutions under full nitrogen thanks to a wide process window and high temperature stability.
In practice, it has been shown that, if used correctly, washing the circuit boards soldered with this flux can usually be dispensed with.
