Wave, selective, manual and repair soldering, dip soldering, strand tinning
No Clean-Flux, alcohol-based
Di-carboxylic acids, minimal resin content, halogenide-free (WEEE/RoHS compliant)
Type ISO-9454: 2231 // DIN EN 61190-1-1: L0 (ORL0)
| Appearance: | colourless, light yellowish, transparent liquid |
| Hazardous goods: | Yes |
| Solids content: | 3.0 wt.-% |
| Acid value: | 18 - 21 mg KOH/g |
| Halogenide-free: | Yes |
| Resinous: | Yes |
| Available as a concentrate: | Yes |
| Density at 20 °C: | 0.796 (+/-0.003) g/ml |
| Flash point: | 12 °C |
| Durability: | 24 months |
Like all multifluxes, the EO-B-001B can be used for wave (spray fluxing) as well as for selective, manual and dip soldering and for strand tinning. The B variant correspond to the standard version, with a solids content of 3 wt.-%. This is an all-round version. Soldering results and cleanliness are very good.
The B variant is also available as a metering pen or dosing bottle and is therefore very suitable for manual and repair soldering.
Practice has shown, that no washing is needed for PCBs properly soldered with EO-B-001B.
