Wave, selective, manual and repair soldering, dip soldering, strand tinning
No Clean-Flux, alcohol-based
Di-carboxylic acids, minimal resin content, halogenide-free (WEEE/RoHS compliant)
Type ISO-9454: 2231 // DIN EN 61190-1-1: L0 (ORL0)
| Appearance: | colourless, light yellowish, transparent liquid |
| Hazardous goods: | Yes |
| Solids content: | 4.0 wt.-% |
| Acid value: | 27 - 32 mg KOH/g |
| Halogenide-free: | Yes |
| Resinous: | Yes |
| Available as a concentrate: | Yes |
| Density at 20 °C: | 0.796 (+/- 0.003) g/ml |
| Flash point: | 12 °C |
| Durability: | 24 months |
Like all multifluxes the EO-B-001C can be used for wave (spray fluxes) as well as for selective, manual and dip soldering as well as strand tinning. The C variant has a 4 wt.-% solids content. It was specially developed for power electronics where large components have to be soldered at low mounting densities. EO-B-001C has also established itself for special applications in which greater amounts of flux are needed.
Practice has shown, that no washing is needed for PCBs properly soldered with EO-B-007A.
