Hand, repair and dip soldering, special applications, suitable for SnPb and Pb-free alloys
No Clean flux paste based on synthetic resins
Di-carboxylic acids, synthetic resin, VOC-free, halogen-free (WEEE/RoHS-compliant)
Type ISO-9454: 1.2.3.1 // DIN EN 61 190-1-1: REL0
| Appearance: | Bright yellow, waxy paste |
| Odor: | mild |
| Solids content: | Very high |
| Density at 20 °C: | 0.9 - 1.0 g/ml |
| Activators/resin: | Di-carboxylic acids, synthetic resin, halogen-free |
| Flash point: | > 80 °C |
| Viscosity (DIN EN ISO 3219): | 68 |
| Viscosity (DIN 51810-1): | Start: 3,783 - End: 2,367 |
| Durability: | 12 months |
The flux paste FP-260 was developed for repair soldering. The flux paste is also suitable for dip tinning and special applications. FP-260 is characterized by high activity as well as good wetting and spreading. Due to these properties, the paste should be applied sparingly. It is applied from a dosing syringe with a plastic tip. This enables precise dosing and positioning of the paste. The flux paste can be applied using a hot air or soldering iron.
