Description
EO-B-013 is a powerful No Clean-Flux alcohol-based with di-carboxylic acids and synthetic resin. This flux has been developed for wave processes as well as for dip soldering processes and strand tinning. It can be applied with all common application processes (except foaming). This flux is very versatile in use, good results have been achieved both with wave soldering and special applications. The general rule to apply as little quantity of flux as possible, is also applicable for this product.
Spray fluxing: With the dosing option quantify the flux, first set to 15 – 30 ml/min., observe the even distribution of flux on the circuit board (if necessary test with heatsensitive paper) and then adjust to the optimal quantity.
Preheating: For “simple” PCBs, a preheating temperature of 80 – 110 °C is recommended, for “more complex” PCBs of 100 – 130 °C on the top side of the PCB. The use can be made both in leaded and lead-free solder systems.
Customer added value
- Wide range of applications (multiflux)
- Very good soldering properties (capillarity, wetting)
- Available as concentrate (granulate)
- Broad process window (very high thermal stability, good activity over a long interval)
- Very good residue behaviour (very clean, high SIR)
- Successful passing of internal test (SIR selective)