No clean, alcohol-based flux, di-carboxylic acids, minimal
resin content, halogen-free (WEEE/RoHS compliant)
ISO-9454: 2231 // DIN EN 61190-1-1: L0 (ORL0)
Application area: | Wave- and selective soldering, manual- and repair soldering, dip soldering |
Appearance/smell: | colorless to light yellow, clear |
Solids content: | 3.0 Gew.-% (wt.-%) |
Density at 20 °C: | 0.796 (+/- 0.003) g/ml |
Acid number: | 23–26 mg KOH/g |
Activators: | di-carboxylic acids, very low resin content |
Solvents: | short-chain alcohols |
Flash point: | 12 °C |
Durability: | 12 months |
Like all multi-fluxes, the EO-B-002B can be used for wave (spray fluxes) as well as for selective, manual, and dip soldering. The B variant is the standard version with a 3% solids content. It is an all-round version. Soldering results and cleanliness are very good. Even on pure copper surfaces good results are achieved– for instance when processing LEDs on heat sinks. Practice has shown, that no washing is needed for PCBA properly soldered with EO-B-002B.
The B variant is also offered as a metering pen or metering bottle. It is thus ideal for manual and repair soldering.
Customer added value:
Questions about our products?
We will advise you by phone 06123 / 7046-0.