No clean, alcohol-based flux, di-carboxylic acids, minimal
resin content, halogen-free (WEEE/RoHS compliant)
ISO-9454: 2231 // DIN EN 61190-1-1: L0 (ORL0)
|Application area:||Wave- and selective soldering, manual- and repair soldering, dip soldering|
|Appearance/smell:||colorless to light yellow, clear|
|Solids content:||4.0 Gew.-%|
|Density at 20 °C:||0.797 (+/- 0.003) g/ml|
|Acid number:||31–35 mg KOH/g|
|Activators:||di-carboxylic acids, very low resin content|
|Flash point °C:||12|
Like all multi-fluxes, the EO-B-002C can be used for wave (spray fluxes) as well as for selective, manual, and dip soldering. The C variant has a 4% solids content. It was especially developed for power electronics where large components have to be soldered at low mounting densities. EO-B-002C has also established itself in special applications in which greater amounts of flux are needed.
Practice has shown, that no washing is needed for PCBA properly soldered with EO-B-002C.
Customer added value:
Questions about our products?
We will advise you by phone 06123 / 7046-0.