No clean, alcohol-based flux, synthetic resin, di-carboxylic
acids, halogen-free (WEEE/RoHS ccompliant)
ISO-9454: 1231 // DIN EN 61190-1-1: L0 (REL0)
|Application area:||Wave- and selective soldering, manual- and repair soldering, dip soldering|
|Appearance/smell:||colorless to light yellow, clear|
|Solids content:||1.8 Gew.-% (wt.-%)|
|Density at 20 °C:||0.793 (+/- 0.003) g/ml|
|Acid number:||15–18 mg KOH/g|
|Activators:||di-carboxylic acids, very low resin content|
|Flash point:||12 °C|
EO-B-004 is a multiflux intended for wave (spray fluxes), selective, immersion, or manual soldering processes, it consists of alcohol-based solvents, synthetic resin and halogen-free activators. With a 1.8% solids content this variant was developed especially for full-tunnel nitrogen applications. It features a wide processing window and great temperature stability to guarantee a better soldering result than that obtained with traditional adipic acid solutions under full nitrogen. Soldering results and cleanliness are very good.
Practice has shown, that no washing is needed for PCBA properly soldered with EO-B-004.
Customer added value:
Questions about our products?
We will advise you by phone 06123 / 7046-0.