No clean, alcohol-based flux, di-carboxylic acids, very low
resin content,halogen-free (WEEE/RoHS compliant)
ISO-9454: 2231 // DIN EN 61190-1-1: L0 (ORL0)
Application area: | Wave- and selective soldering, manual- and repair soldering, dip soldering |
Appearance/smell: | colorless to light yellow, clear |
Solids content: | 1.9 Gew.-% |
Density at 20 °C: | 0.793 (+/-0.003) g/ml |
Acid number: | 15–18 mg KOH/g |
Activators: | di-carboxylic acids, very low resin content |
Solvents: | short-chain alcohols |
Flash point: | 12 °C |
Durability: | 12 months |
Like all multi-fluxes, the EO-B-007A can be used for wave (spray fluxes) as well as for selective, manual, and dip soldering. The A version has a low 1.9% solids content. This variant was developed especially for full-tunnel nitrogen applications. It features a wide processing window and great temperature stability to guarantee a better soldering result than that obtained with traditional adipic acid solutions under full nitrogen. Soldering results and cleanliness are very good.
Practice has shown, that no washing is needed for PCBs properly soldered with EO-B-007A.
Customer added value:
Questions about our products?
We will advise you by phone 06123 / 7046-0.