Otto's Original - Quality products since 1901
Flux
EO-Flux Pen FA-35
Flux with reduced alcohol content; activated halogen-
and rosin-free (WEEE/RoHS conformant)
DIN 61190-1-1: (IEC OR/L0) or type 2.1.3.A under 9454
Packaging units:
Plastic sleeve with pressure metering system with 8 ml volume, available in PE-pouch of 10 pcs. (minimum purchase)
Plastic sleeve with pressure metering system with 8 ml volume, available in PE-pouch of 10 pcs. (minimum purchase)
| Application area: | Manual- and repair soldering |
| Appearance/smell: | clear, colourless liquid |
| Solids content: | 3.5 Gew.-% (wt.-%) |
| Density at 20 °C: | 0.87 (+/-0.01) g/ml |
| Acid number: | 28–32 mg KOH/g |
| Activators: | di-carboxylic acids |
| Solvents: | Mixture of alcohol and water |
| Flash point: | 12 °C |
Download product informationPDF (313 KB)
Description
The EO Flux-Pen allows spot-on application of flux on PCBs. EO Flux-Pen consists of a cartouche- a special pressure dosing system with felt tip and a closing cap. The flux is kept in the cartouche and is applied with the felt tip. The special pressure dosing system allows thorough, pointed flux-application.
Customer added value
- Good wetting and evaporation
- Good soldering properties
- Broad process window
- Diminished environmental impact
- Transport- and storage-safe even in winter
- Test under ‘house standard’ passed, thus low risk of flux residues
- Broad application possibilities
- Easy handling
- No spilling and dripping of the flux while using
- Fast and cost-efficient rework
- Flux with low solids content
Questions about our products?
We will advise you by phone 06123 / 7046-0.
