EO-NCF-002
Electronic nozzle cleaner for cleaning soldering nozzles of selective soldering machines
Halogen-free activation complex
RoHS / WEEE-compliant, ISO-9454: 2231 (2.2.3.A)
Canisters with 100 ml, 500 ml, 1 liter, 5 liters and 20 liters
| Application area: | Medium for automatic nozzle cleaning of selective soldering machines |
| Appearance/smell: | colorless to light amber-colored liquid |
| ph-value: | 115–135 mg KOH/g |
| Density 20 °C: | 0.84–0.86 g/cm³ |
| Flash point: | 12 °C |
| Substances: | mixture of monohydric alcohols |
| Durability: | With proper storage between 15°C and 25°C the shelf life is 12 months |
| Activators: | resin-di-carboxylic acid-complex, halogen-free |
Description
EO-NCF-002 is activated on an organic base and halogen-free. It was developed especially for the cleaning of solder nozzles.
Due to its activation complex, this nozzle cleaner removes scaling and scraping deposits on solder nozzles of selective soldering machines.
Processing notes:
With light to moderate deposits on the nozzle: Switch off selective wave, wet nozzle with EO-NCF-002, allow to act and switch the wave back on again after approx. 2–3 minutes (possibly also allow the wave to run “lightly” for 2–3 minutes and then bring up to operating performance).
With heavy deposits on the nozzle: Switch off selective wave, wet nozzle with EO-NCF-002, allow to act and switch the wave back on again after approx. 2–3 minutes.
Afterwards remove the deposits with a brush or similar and then switch the wave back on again. If the deposits have not been sufficiently removed, repeat procedure.
Questions about our products?
We will advise you by phone 06123 / 7046-0.
