No clean, alcohol-based flux, synthetic resin, di-carboxylic
acids, halogen-free (WEEE/RoHS compliant)
ISO-9454: 1231 // DIN EN 61190-1-1: L0 (REL0)
Application area: | Wave soldering (spray fluxing) |
Appearance/smell: | colorless to reddish, clear |
Solids content: | 2.5 Gew.-% |
Density at 20 °C: | 0.794 (+/- 0.003) g/ml |
Acid number: | 22–25 mg KOH/g |
Activators: | synthetic resin with di-carboxylic acids |
Solvents: | short-chain alcohols |
Flash point °C: | 12 |
Durability: | 6 months |
GSP-2533/RX/OVAP established over the course of many years, is S-250/FRO’s predecessor. Very good soldering results were achieved regardless of the respective type of system. The cleanliness is very good. GSP-2533/RX/OVAP is unsuitable for foam fluxing. It’s not recommended for selective or manual soldering. Please note the shelf life of 6 month.
Practice has shown, that no washing is needed for PCBA properly soldered with this flux. The IC test with needle adapters generally completes without problems.
Customer added value:
Questions about our products?
We will advise you by phone 06123 / 7046-0.