Otto's Original - Quality products since 1901
Flux

EO-FP-001

No clean flux paste based on inorganic halogens,
zinc free (WEEE/RoHS conformant)
2.2.2.C // M1 acc. ISO 9454 // DIN EN 61 190-1-1

Packaging units:
syringes with 10 ml
Application area: Manual-, repair- and dip soldering, special applications, suitable for SnPb and Pb-free alloys
Appearance/smell: pasty, blue/turquoise, mild
Solids content: very high Gew.-%
Density at 20 °C: 0.9–1.0 g/ml
Activators: inorganic halogens
Flash point °C: >80
Durability: 12 months

Description

The soldering flux paste, EO-FP-001, has been developed for repair soldering. In addition, the soldering flux paste is suitable for dip tinning as well as special applications. EO-FP-001 is characterized by a high activity and good wetting and spreading properties. Due to these properties, the paste should be applied sparingly. Application takes place via a dosing syringe with a plastic tip. This enables the accurate dosing and positioning of the paste. The processing of the soldering flux paste can be done with the aid of hot air or soldering irons.

Customer added value:

  • Excellent soldering properties (capillarity, wetting)
  • Broad process window (very high thermal stability, very good activity over long interval 150°C – 260°C )
  • Low corrosion tendency despite very strong activation
  • Contains no free acid und no resin
  • No curing or crystallization effect
  • Exact, drip-free dosage
  • Minimal smoke and odour generation
  • Flux residues visible under UV light
  • VOC-free
 

Questions about our products?
We will advise you by phone 06123 / 7046-0.