FP-260
Flux paste based on synthetic resins, (di)carboxylic acids,
halogen-free (WEE/RoHS conformant)
Type 1.2.3.1 // RELO acc. ISO 9454 // DIN EN 61 190-1-1
syringes with 5 or 10 ml, cartridge
| Application area: | Manual-, repair- and dip soldering, special applications, suitable for SnPb and Pb-free alloys |
| Appearance/smell: | pasty, bright yellow, waxy, mild acidic |
| Solids content: | very high Gew.-% |
| Density at 20 °C: | 0.9–1.0 g/ml |
| Activators: | synthetic resins, di-carboxylic acids, halogenfree |
| Flash point: | >80 °C |
| Viscosity (DIN EN ISO 3219): | 68 |
| Viscosity (DIN 51810-1): | start: 3.783 / end: 2.367 |
| Durability: | 12 months |
Download product informationPDF (2 MB)
Description
The soldering flux paste, FP-260, has been developed for repair soldering. In addition, the soldering flux paste is suitable for dip tinning as well as special applications. FP-260 is characterized by a high activity and good wetting and spreading properties. Due to these properties, the paste should be applied sparingly. Application takes place via a dosing syringe with a plastic tip. This enables the accurate dosing and positioning of the paste. The processing of the soldering flux paste can be done with the aid of hot air or soldering irons.
Customer added value:
- Very good soldering properties (capillarity, wetting)
- Broad process window (very high thermal stability, very high activity over a long interval)
- Exact dosage
- No separation
- Flux residues visible under UV light
- VOC-free
Questions about our products?
We will advise you by phone 06123 / 7046-0.
