"All versions of the EO-Y-006 series consist of 60% alcohol and 40 % water. However, the fluxes EO-Y-006 A and C differ in their solids content and acid number. The flux EO-Y-006 A has a solids content of 1.9 to 2.2%, whereas C has a higher solids content of 3.9 to 4.2%. EO-Y-006, which was previously available on the market, now becomes EO-Y-006B, mit einem unveränderten Feststoffgehalt von 3,0 bis 3,2%.“, erklärt Markus Geßner, Marketing- und Vertriebsleiter der Emil Otto GmbH. Mit den Neuprodukten wird das Sortiment der hybriden Flussmittel nochmals erweitert und auf die Kundenbedürfnisse abgestimmt. „Diese Flussmittel erreichen aufgrund ihrer alkohol-wasserbasierenden Rezeptur sehr gute Lötergebnisse und die Leiterplatte ist nach Einsatz der Flussmittel sehr sauber. Alle Varianten der EO-Y-006-Reihe sind für den Einsatz auf Organic Solderability Preservative (OPS) Leiterplatten geeignet“, erklärt Geßner weiter. Die Flussmittel wurden für den Einsatz beim Wellen- und Selektivlöten entwickelt. Darüber hinaus können sie sowohl für das Hand- und Reparaturlöten als auch für das Tauchlöten eingesetzt werden. Die sehr guten Löteigenschaften zeigen sich insbesondere beim Durchstieg und der Benetzung der Leiterplatte.
The individual variants of EO-Y-006 allow customers to select a flux that is tailored to their application. The A variant has a low solids content of around 2% and was specially developed for full-tunnel nitrogen applications. The flux guarantees very good soldering results under full nitrogen due to its wide process window and high temperature stability. The standard version corresponds to the B variant, which has a solids content of around 3%. This version of the EO-Y-006 is also available as a dosing pen or dosing bottle. The third version is the C variant, which was specially developed for power electronics where large component bodies have to be soldered with a high placement density.